APC APC Smart-UPS Rack mountable RC 1000VA 230V
Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Provides temporary battery power when the utility power is out.
Small UPS footprint provides maximum usage of valuable electrical room floorspace
Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Allows you to recharge your battery while on generator power.
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
Intelligent Battery Charging
Microprocessor controlled, 3-stage regulated charging ensures the fastest recharge times without decreasing battery life.
LCD Status Display
Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.
Sine wave output
Eliminates humming and heat generated when powering tube lights and fans
Customize UPS capabilities with management cards.
Wide Input Voltage Window
Saves your battery power for when you really need it - during power cuts!
|8.8 × 38 × 43.8 cm
|Builtin Battery Capacity
12V / 5AH
|No. of Batteries
Upto 15 Mins.
|Output Power Capacity
800Watts / 1.0kVA
50/60 Hz +/- 3 Hz (auto sensing)
|Nominal Input Voltage
DB-9 RS-232, RJ-45 10/100/1000 Base-T, Smart-Slot, Optional : SNMP Card ( SNMP Slot Provided)
|Nominal Output Voltage
|In Box Accessories
Computer Interface Cable, Input Power Cable, Manual, Power Chute Software, UPS, Warranty Card
2 Years Onsite Warranty